Roller veneer dryer is a new generation wood veneer drying machine. It adopts the latest international pressure contact veneer drying technology to ensure the veneer is heated evenly. It can be used to dry rubber wood, eucalyptus, birch, teak, all kinds of hard wood and soft wood veneer etc.
Shine roller veneer dryer has the advantages of simple operation, safety and practicality, stable operation and easy maintenance. The processes of hot pressing-leveling-drying are finished at the same time.The veneer after drying is flat, smooth and without marks and the moisture content is uniform.
Advantages of Veneer Machinery
1. The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste.
2. The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content. Simple operation and low failure rate.
3. The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.
4. After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples.
5. Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.
6. We have a professional R&D team which can design different models according to customer’s special requirement.
7. The perfect after-sale service team can supply 24 hours online service.
Product Parameters of Veneer Machinery
Model No | GTH30-52 |
Working Width | 3.0m |
Deck | 4 |
Roller material | Q235B, φ102 special shaft tube |
Heating area length | 48m |
Cooling area length | 4m |
Veneer thickness and size | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 8-10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/h) | 7-8 |
Veneer transport speed | 5-22m/min,16A chain |
Hot air blower | Power: 4KW(48pc) |
Traction motor | Power: 5.5KW,frequency control(4pc) |
Cold air blower | Power: 4KW(4pc) |
Air intake fan | Power: 15KW(2pc) |
10 ton biomass burner | Power: 16.5KW |
Total power | 285KW |
Actual electricity consumption | About 200kwh per hour |
Customer Case
The Factory
Packaging & Shipping
Copyright By © Shandong Shine Machinery Co.,Ltd