Veneer Dryer Machine adopts frequency conversion control, which can adjust the transmission speed and temperature according to different veneer thickness and moisture content to achieve the ideal drying effect. Low failure rate and reduced downtime.
Both the hot air blower and the cold air blower use 5.5kw axial flow fans, which not only fully guarantee the air volume required for drying, but also reduce the total installed power by more than 35%, and minimize the power consumption of the whole set of equipment.
Advantages of Veneer Dryer Machine
1. The well-developed heat exchange system fully improves the energy utilization rate and saves unnecessary energy waste.
2. The control cabinet has automatic temperature control and speed regulation system, which can accurately control the final moisture content. Simple operation and low failure rate.
3. The temperature in the burner is 40-60 ℃ higher than that of the traditional dryer (steam, thermal oil), and the temperature is controlled at 140-180 ℃, which shortens the drying time and increases the output.
4. After drying, the veneer is smooth, with no cracks, wrinkles, or end ripples.
5. Shrinkage and hardening are kept to a minimum and veneer collapse and honeycomb structure are avoided.
6. We have a professional R&D team which can design different models according to customer’s special requirement.
7. The perfect after-sale service team can supply 24 hours online service.
Product Parameters of veneer drying machine
Model No | GTH30-48 |
Working Width | 3m |
Deck | 2 |
Roller material | Q235B, φ89 steel pipe |
Heating area length | 44m |
Cooling area length | 4m |
Veneer thickness | 0.8-8mm |
Veneer water moisture | Fresh veneer to about 10% |
Heating material & drying temperature | Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent. |
Drying capacity (m³/24h) | 70-80cbm |
Veneer transport speed | 5-22m/min,16A chain |
Hot air blower | Power:5.5KW(11pc) |
Traction motor | Power: 7.5KW,frequency control(2pc) |
Cold air blower | Power: 5.5KW(1pc) |
Air intake fan | Power : 11KW(2pc) |
6 ton biomass burner | Power: 16.5KW |
Total power | 119.5KW |
Actual electricity consumption | About 84kwh per hour |
Customer Case
The Factory
Packaging & Shipping
Copyright By © Shandong Shine Machinery Co.,Ltd