Home > Products > Veneer Dryer > Two Primary Goals for Veneer Drying System of Shine Veneer Roll Jet Dryers

Two Primary Goals for Veneer Drying System of Shine Veneer Roll Jet Dryers

Category：

Veneer Dryer
Brand：

SHINE
Browse number：

4780
Release time：

2020-04-02 10:12:08
E-mail:info@sdshinemachinery.com

Detailed Description
Attributes

Two primary goals for veneer drying system of Shine Veneer Roll Jet Dryers Introduction

Two primary goals for veneer drying system of Shine Veneer Roll Jet Dryers. First, Shine Veneer Roller Dryer can consistently produce high quality veneer that has a uniform dry moisture content, an aesthetic appearance, and is supple enough to minimize damage during the stacking process. Second, Shine Roller Veneer Jet Dryer can dry the veneer in the most cost effective and environmentally friendly manner. Shine Jet Ventillated Roller Veneer Dryer use the least amount of thermal energy and producing a minimum of volume dryer exhaust.

Veneer Dryer Model

veneer dryer scheme drawing .jpg

Main Technical Parameter for Two Primary Goals for Veneer Drying System of Shine Veneer Roll Jet Dryers

Parameter Model	DHS20M	DHS24M	DHS28M	DHS32M	DHS36M	DHS40M
Work width（m）	3	3	3	3	3	3
Deck	2	2	2	2	2	2
Veneer thickness（mm）	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5
Heating area （m）	16	20	24	28	32	36
Cooling area (m)	4	4	4	4	4	4
Initial water content(%)	50-80	50-80	50-80	50-80	50-80	50-80
Finished water content(%)	10	10	10	10	10	10
Drying capacity (m³/h)	0.8-1.1	1.1-1.4	1.5-1.8	1.8-2.2	2-2.5	2.4-2.7
Heat exhaustion（10000 kcal）	28-38.5	38.5-49	52.5-63	63-77	70-87.5	84-94.5
Traction motor power(kw)	5.5*2	5.5*2	5.5*2	5.5*2	5.5*2	5.5*2
Hot air fan power (kw)	11*4	11*5	11*6	11*7	11*8	11*9
Air cooling fan power（kw）	11	11	11	11	11	11
Total power (kw)	66	77	88	99	110	121
Overall size LxWxH（m）	20*4.5	24*4.5	28*4.5	32*4.5	36*4.5	40*4.5