Home > Products > Veneer Dryer > Shine Veneer Dryer Hold the Veneer Flat

Shine Veneer Dryer Hold the Veneer Flat

Category：

Veneer Dryer
Brand：

SHINE
Browse number：

5050
Release time：

2020-02-26 10:24:25
E-mail:info@sdshinemachinery.com

Detailed Description
Attributes

In general, dryers are operated to hold the veneer as flat as possible during drying and to transfer as much heat as possible to the veneer.

The importance of holding the veneer flat during drying can be judged by comparing matched sheets of veneer dried with various amounts of restraint. In general, the buckle will be greatest in the veneer hung from the ends and allowed to dry at ambient room conditions. Next will be veneer restrained by stickers and dried in a kiln. Veneer dried in a mechanical dryer with a roller or wire-mesh conveyor will buckle less than matched material dried in a kiln. The least buckled will be veneer dried between flat hotplates.

veneer dryer scheme drawing .jpg

Main Pictures of Shine Veneer Dryers

4Deck Veneer Dryer

Wood Veneer Dryer

Roller Veneer Dryer.jpg 10 Ton Biomass Burner

Technical Parameter for Shine Veneer Dryer

Parameter Model	DHS44M	DHS48M	DHS52M	DHS56M	DHS60M
Work width（m）	3	3	3	3	3
Layer	2	2	2	2	2
Veneer thickness（mm）	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5
Heating area （m）	40	44	44	48	52
Cooling area (m)	4	4	4+4	4+4	4+4
Initial water content(%)	50-80	50-80	50-80	50-80	50-80
Finished water content(%)	10	10	10	10	10
Drying capacity (m³/h)	2.7-3.1	3-3.3	3.2-3.5	3.5-3.8	3.8-4.1
Heat exhaustion（10000 kcal）	94.5-108.5	105-115.5	112-122.5	122-132	132-143
Traction motor power(kw)	5.5*2	*7.52**	7.5*2	7.5*2	7.5*2
Hot air fan power (kw)	11*10	*1111**	11*11	11*12	11*13
Air cooling fan power（kw）	11	11	11*2	11*2	11*2
Total power (kw)	132	147	158	169	180
Overall size LxWxH（m）	44*4.5	*484.5**	52*4.5	56*4.5	60*4.5