Rubber Wood Plywood Core Veneer Dryer

Category：

Rubber Tree Veneer Dryer
Brand：

SHINE
Browse number：

9042
Release time：

2018-05-18 15:33:52
E-mail:info@sdshinemachinery.com

Detailed Description
Attributes

Rubber Wood Plywood Core Veneer Dryer Introduction

Rubber wood veneers have to be dryed within 2 hours after peeling, so the rubber wood veneer drying machine has to be used together with rubber wood peeling machine. the rubber wood veneer drying line is widely used in Thailand &Burma etc Southeast Asia areas. 60m rubber roller veneer dryer machine is a normal and big size model Shine roller veneer dryer . Shine veneer drying machine can be from 20m to 60 m . 1-3 deck. normally 4m is one section. we also can design special ones for different customers' requirements. The main components of Shine veneer drying equipment is as follows:1.Drying system :the veneer dryer adopts the most scientific drying principle ,and the hot air in the hot air stove is injected directly into the upper and lower bellows of the machine by centrifugal blower. The hot air blows to the upper and lower sides of the running veneer through the nozzles of the upper and lower bellows, so that the veneer is heated evenly and thus plays the role of drying 2.Control system: Adopt endless gearbox to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect. 3.Transmission system :the veneer is fed into the machine through the feed inlet vertically, and the chain drives the upper and lower rows of rollers, running relatively. The veneer moves forward by the self-weight pressure of the upper roll, and during the veneer passes through the two rollers and the upper and lower air nozzles, it achieves the effect of drying and ironing. So the veneer dried by this machine is flat, smooth and without marks. 4.Heating system:Steam heating, heat conduction oil heating, hot stove type heating，waste wood or other biomass materials. Users can choose one most suitable model.

layout drawing(1)(1).png

Technical Parameter for DHS60M Rubber Timber Roller Veneer Drying Line

Parameter Model	DHS44M	DHS48M	DHS52M	DHS56M	DHS60M
Work width（m）	3	3	3	3	3
Deck	1	1	1	1	1
Veneer thickness（mm）	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5
Heating area （m）	40	44	44	48	52
Cooling area (m)	4	4	4+4	4+4	4+4
Initial water content(%)	50-80	50-80	50-80	50-80	50-80
Finished water content(%)	10	10	10	10	10
Drying capacity (m³/h)	1.5-1.7	1.65-1.8	1.7-1.9	1.8-2	1.9-2.2
Heat exhaustion（10000 kcal）	52.5-59.5	57.75-63	59.5-66.5	63-70	66.5-77
Traction motor power(kw)	5.5	7.5	7.5	7.5	7.5
Hot air fan power (kw)	7.5*10	7.5*11	7.5*11	7.5*12	*7.513**
Air cooling fan power（kw）	7.5	7.5	7.5*2	7.5*2	*7.52**
Total power (kw)	88	97.5	105	112.5	120
Overall size LxWxH（m）	44*4.5	48*4.5	52*4.5	56*4.5	*604.5**