Home > Products > Veneer Dryer > plywood core veneer dryer

plywood core veneer dryer

Category：

Veneer Dryer
Brand：

SHINE
Browse number：

494
Release time：

2024-06-26 15:11:14
E-mail:info@sdshinemachinery.com

Detailed Description

The shine heat exchanger adopts step-by-step heat exchange. The specifications of each section of the heat exchanger are different, and the hot air in the heat exchanger can be evenly distributed to the veneer. The moisture content of the dried veneer is uniform, flat, without wrinkles or end ripples, no cracks, and the surface bonding state is good, which fully improves the energy utilization rate and saves unnecessary energy waste.

The full automatic control and frequency conversion control system can automatically adjust the transmission speed and temperature according to the thickness and moisture content of different veneers to achieve the ideal drying effect, and the final moisture content can be accurately controlled. It avoids the phenomenon that a large number of veneers are over-dried or the drying does not meet the process requirements.

veneer drying.jpg

Product Parameters of plywood core veneer dryer

Model No	GTH30-36
Working Width	3.0m
Deck	4
Roller material	Q235B, φ102 special shaft tube
Heating area length	32m
Cooling area length	4m
Veneer thickness and size	0.8-8mm
Veneer water moisture	Fresh veneer to about 8-10%
Heating material & drying temperature	Waste wood, 140-200°C adjustable. Temperature control accuracy ±5°C. There is automatic temperature control and speed regulation system, which can guarantee the moisture content is consistent.
Drying capacity (m³/day)	110
Veneer transport speed	5-22m/min，16A chain
Hot air blower	Power: 4KW（32pc）
Traction motor	Power: 5.5KW，frequency control（4pc）
Cold air blower	Power: 4KW（4pc）
Air intake fan	Power: 15KW（2pc）
10 ton biomass burner	Power: 16.5KW
Total power	212.5KW
Actual electricity consumption	About 149kwh per hour