Home > Products > Veneer Dryer > Lowest Cost Wood Veneer Drying Machine for Sale

Lowest Cost Wood Veneer Drying Machine for Sale

Category：

Veneer Dryer
Brand：

SHINE
Browse number：

6497
Release time：

2019-10-24 08:42:26
E-mail:info@sdshinemachinery.com

Detailed Description
Attributes

Lowest Cost Wood Veneer Drying Machine Introduction

48m 2 deck timber veneer dryer is one of Shine normal roller veneer dryers. The capacity of DHS48M veneer drying machine is about 80cbm per day . Also Shine machinery can make other capacity roller veneer drying machine according to customers requirements . It can be 20-60m and 1-3 deck,also we can design special models according to customer's special requirements.The plywood veneer dryer produced by Shandong Shine Machinery Co., Ltd. is widely used in flatting drying of high-grade plywood, multi layer board and architectural core face veneer. Shine roller veneer drying equipment is equipped with environmental protection type hot air stove. its characteristics: save fuel, twice use of hot air , increase heating speed.the veneer after drying is flat,moisture content is up to national standard. Equipped with integral type high efficiency energy saving hot air stove. No boiler and other auxiliary equipment, no use water,coal, electricity. Rind ,wood chips and wood craps are all can be as fuel. and can quickly achieve the heat required by the veneer dryer machine.

layout drawing.png

Technical Parameter for DHS48M Roller Veneer Drying Line and Others

Parameter Model	DHS44M	DHS48M	DHS52M	DHS56M	DHS60M
Work width（m）	3	3	3	3	3
Layer	2	2	2	2	2
Veneer thickness（mm）	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5
Heating area （m）	40	44	44	48	52
Cooling area (m)	4	4	4+4	4+4	4+4
Initial water content(%)	50-80	50-80	50-80	50-80	50-80
Finished water content(%)	10	10	10	10	10
Drying capacity (m³/h)	2.7-3.1	3-3.3	3.2-3.5	3.5-3.8	3.8-4.1
Heat exhaustion（10000 kcal）	94.5-108.5	105-115.5	112-122.5	122-132	132-143
Traction motor power(kw)	5.5*2	*7.52**	7.5*2	7.5*2	7.5*2
Hot air fan power (kw)	11*10	*1111**	11*11	11*12	11*13
Air cooling fan power（kw）	11	11	11*2	11*2	11*2
Total power (kw)	132	147	158	169	180
Overall size LxWxH（m）	44*4.5	*484.5**	52*4.5	56*4.5	60*4.5

Main Characteristics of Shine Plywood Process Drying Machine

1. The veneer after drying by Shine veneer dryer machine is smooth and the moisture content is uniform, and the high temperature drum has direct contact with the wet veneer for heat transfer, and the heat efficiency is high, the heat loss is small, and the heat loss is reduced. the selling price for veneer dried by roller veneer dryer is higher than natural drying.

2.The roller veneer drying machine adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect.

3.Shine roller plywood veneer dryer covers a small area, less ancillary equipment, convenient for transportation, quick installation, and can be put into use quickly and conveniently.

4.Standardized production models, can make different sections or decks according to different capacity requirements.which can meet different customers' requirements.