The planer (rotary) cutting veneer is fed into the inlet of the jet roller type veneer dryer, and through the relative rotation of several pairs of upper and lower rollers located inside the dryer, the planning veneer moves forward in a predetermined direction, and in the course of the veneer travel, The hot wind of 120-180 degrees Celsius is sprayed vertically to the face and back surfaces of the veneer by the nozzle located between the two pairs of rollers with the wind speed of V=1.5M/S. Under the control of the electronic control system, the optimal travel speed is adjusted to achieve the best drying effect. And the uneven veneer, after the relative rotation of the upper and lower rollers, can reach the effect of ironing veneer.
Technical Parameter for Jet Roller Type Veneer Dryer
Parameter Model |
DHS44M
| DHS48M | DHS52M | DHS56M | DHS60M |
Work width(m) | 3 | 3 | 3 | 3 | 3 |
Layer | 2 | 2 | 2 | 2 | 2 |
Veneer thickness(mm) | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 |
Heating area (m)
| 40 | 44 | 44 | 48 | 52 |
Cooling area (m) | 4 | 4 | 4+4 | 4+4 | 4+4 |
Initial water content(%) | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 |
Finished water content(%) | 10 | 10 | 10 | 10 | 10 |
Drying capacity (m³/h) | 2.7-3.1 | 3-3.3 | 3.2-3.5 | 3.5-3.8 | 3.8-4.1 |
Heat exhaustion(10000 kcal) | 94.5-108.5 | 105-115.5 | 112-122.5 | 122-132 | 132-143 |
Traction motor power(kw) | 5.5*2 | 7.5*2 | 7.5*2 | 7.5*2 | 7.5*2 |
Hot air fan power (kw) | 11*10 | 11*11 | 11*11 | 11*12 | 11*13 |
Air cooling fan power(kw) | 11 | 11 | 11*2 | 11*2 | 11*2 |
Total power (kw) | 132 | 147 | 158 | 169 | 180 |
Overall size LxWxH(m) | 44*4.5 | 48*4.5 | 52*4.5 | 56*4.5 | 60*4.5 |
Copyright By © Shandong Shine Machinery Co.,Ltd