Industrial Biomass Rubber Wood Chip Dryer For Sale

Category：

Rubber Tree Veneer Dryer
Brand：

SHINE
Browse number：

9200
Release time：

2018-06-14 10:11:33
E-mail:info@sdshinemachinery.com

Detailed Description
Attributes

Industrial Biomass Rubber Wood Chip Dryer Discription

The biomass rubber wood chip dryer produced by Shandong Shine Machinery Co., Ltd. is widely used in flatting drying of high-grade plywood, multi layer board and architectural core face veneer.the rubber wood chip dryer is equipped with environmental protection type hot air stove. its characteristics: save fuel, twice use of hot air , increase heating speed.the veneer after drying is flat,moisture content is up to national standard. Equipped with integral type high efficiency energy saving hot air stove. No boiler and other auxiliary equipment, no use water, coal, electricity. Rind ,wood chips and wood craps are all can be as fuel. and can quickly achieve the heat required by the rubber wood chip dryer. the operation principle is as follows:Roller Veneer dryer is one of the main equipment in plate production. The quality of veneer drying directly affects the quality of veneer and glued products. The design of hot air continuous roller press is based on the most advanced continuous pressure contact veneer drying technology in the world. The working principle is that the veneer is clamped by the upper and lower seamless steel tube rollers, and the oven temperature reaches 140 ℃ by preheating, and then enters between the upper and lower rollers and blows high pressure hot air to the upper and lower sides of the veneer through the hot air pipe for rapid drying. So it can make the veneer smooth and moisture content even after drying, and it also has the characteristics of direct contact heat transfer between high temperature roller and wet veneer, high thermal efficiency, low heat loss and reducing heat energy consumption.

Main Technical Parameter for DHS44M Biomass Rubber Wood Chip Dryer

Parameter Model	DHS44M	DHS48M	DHS52M	DHS56M	DHS60M
Work width（m）	3	3	3	3	3
Layer	2	2	2	2	2
Veneer thickness（mm）	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5
Heating area （m）	40	44	44	48	52
Cooling area (m)	4	4	4+4	4+4	4+4
Initial water content(%)	50-80	50-80	50-80	50-80	50-80
Finished water content(%)	10	10	10	10	10
Drying capacity (m³/h)	2.7-3.1	3-3.3	3.2-3.5	3.5-3.8	3.8-4.1
Heat exhaustion（10000 kcal）	94.5-108.5	105-115.5	112-122.5	122-132	132-143
Traction motor power(kw)	*5.52**	7.5*2	7.5*2	7.5*2	7.5*2
Hot air fan power (kw)	*1110**	11*11	11*11	11*12	11*13
Air cooling fan power（kw）	11	11	11*2	11*2	11*2
Total power (kw)	132	147	158	169	180
Overall size LxWxH（m）	*444.5**	48*4.5	52*4.5	56*4.5	60*4.5

Main Features of Shine Rubber Wood Chip Dryer

1. The veneer after drying by Shine veneer dryer is smooth and the moisture content is uniform, and the high temperature drum has direct contact with the wet veneer for heat transfer, and the heat efficiency is high, the heat loss is small, and the heat loss is reduced. the selling price for veneer dried by roller veneer dryer is higher than natural drying.

2.The roller veneer drying machine adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect.

3.Shine roller veneer dryer covers a small area, less ancillary equipment, convenient for transportation, quick installation, and can be put into use quickly and conveniently.

4.Standardized production models, can make different sections or decks according to different capacity requirements.which can meet different customers' requirements.