Face Rubber Wood Veneer Drying Machine Cost

Category：

Face Veneer Drying Machine
Brand：

SHINE
Browse number：

8485
Release time：

2018-08-02 16:07:48
E-mail:info@sdshinemachinery.com

Detailed Description
Attributes

DHS28M Face Veneer Dryer Introduction

The face wood plywood veneer dryer produced by Shandong Shine Machinery Co., Ltd. is widely used in flatting drying of high-grade plywood, multi layer board and architectural core face veneer.It is equipped with environmental protection type hot air stove. its characteristics: save fuel, twice use of hot air , increase heating speed.the veneer after drying is flat,moisture content is up to national standard. Equipped with integral type high efficiency energy saving hot air stove. No boiler and other auxiliary equipment, no use water,coal, electricity. Rind ,wood chips and wood craps are all can be as fuel. and can quickly achieve the heat required by the dryer. Face wood plywood veneer dryer belongs to roller veneer dryer . As the thickness of face veneer is only 0.3-0.8mm , the requirements of face veneer dryer is higher than common veneer drying machine. The material of the face plywood veneer dryer is stainless steel, and the distance between rollers is 140mm .

layout drawing of veneer dryer.png

Main Technical Parameter for Face Rubber Wood Veneer Dryer

Parameter Model	DHS20M	DHS24M	DHS28M	DHS32M	DHS36M	DHS40M
Work width（m）	3	3	3	3	3	3
Deck	1	1	1	1	1	1
Veneer thickness（mm）	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5
Heating area （m）	16	20	24	28	32	36
Cooling area (m)	4	4	4	4	4	4
Initial water content(%)	50-80	50-80	50-80	50-80	50-80	50-80
Finished water content(%)	10	10	10	10	10	10
Drying capacity (m³/h)	0.5-0.65	0.65-0.8	0.8-1	1-1.2	1.15-1.35	1.3-1.5
Heat exhaustion（10000 kcal）	17.5-23	23-285	28-35	35-42	40.25-47.25	45.5-52.5
Traction motor power(kw)	7.5	7.5	5.5	5.5	5.5	5.5
Hot air fan power (kw)	7.5*4	7.5*5	*7.56**	7.5*7	7.5*8	7.5*9
Air cooling fan power（kw）	7.5	7.5	7.5	7.5	7.5	7.5
Total power (kw)	45	52.5	58	65.5	73	80.5
Overall size LxWxH（m）	20*4.5	24*4.5	*284.5**	32*4.5	36*4.5	40*4.5

Main Operation principle of Shine Face Wood Veneer Dryer

Fave wood roller Veneer dryer is one of the main equipment in plate production. The quality of veneer drying directly affects the quality of veneer and glued products. The design of hot air continuous roller press is based on the most advanced continuous pressure contact veneer drying technology in the world. The working principle is that the veneer is clamped by the upper and lower seamless steel tube rollers, and the oven temperature reaches 140 ℃ by preheating, and then enters between the upper and lower rollers and blows high pressure hot air to the upper and lower sides of the veneer through the hot air pipe for rapid drying. So it can make the veneer smooth and moisture content eve after drying, and it also has the characteristics of direct contact heat transfer between high temperature roller and wet veneer, high thermal efficiency, low heat loss and reducing heat energy consumption.