Ebony Wood Plywood Veneer Drying Equipment for Woodworking Machine

Category：

Roller Core Veneer Dryer
Brand：

SHINE
Browse number：

7853
Release time：

2018-10-31 16:33:54
E-mail:info@sdshinemachinery.com

Detailed Description
Attributes

Introduction of Ebony Wood Plywood Veneer Dryer Line

Shine normal ebony plywood veneer dryer line includes 20-60m and 1-3 deck,also we can design special models according to customer's special requirements.The plywood veneer dryer line produced by Shandong Shine Machinery Co., Ltd. is widely used in flatting drying of high-grade plywood, multi layer board and architectural core face veneer. Shine 2 deck roller veneer drying equipment is equipped with environmental protection type hot air stove. its characteristics: save fuel, twice use of hot air , increase heating speed.the veneer after drying is flat,moisture content is up to national standard. Equipped with integral type high efficiency energy saving hot air stove. No boiler and other auxiliary equipment, no use water,coal, electricity. Rind ,wood chips and wood craps are all can be as fuel. and can quickly achieve the heat required by the plywood veneer dryer.

layout drawing of veneer dryer.png

Technical Parameter for Ebony Plywood Veneer Dryer Line

Parameter Model	DHS20M	DHS24M	DHS28M	DHS32M	DHS36M	DHS40M
Work width（m）	3	3	3	3	3	3
Deck	2	2	2	2	2	2
Veneer thickness（mm）	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5
Heating area （m）	16	20	24	28	32	36
Cooling area (m)	4	4	4	4	4	4
Initial water content(%)	50-80	50-80	50-80	50-80	50-80	50-80
Finished water content(%)	10	10	10	10	10	10
Drying capacity (m³/h)	0.8-1.1	1.1-1.4	1.5-1.8	1.8-2.2	2-2.5	2.4-2.7
Heat exhaustion（10000 kcal）	28-38.5	38.5-49	52.5-63	63-77	70-87.5	84-94.5
Traction motor power(kw)	5.5*2	5.5*2	5.5*2	5.5*2	5.5*2	5.5*2
Hot air fan power (kw)	11*4	11*5	11*6	11*7	11*8	11*9
Air cooling fan power（kw）	11	11	11	11	11	11
Total power (kw)	66	77	88	99	110	121
Overall size LxWxH（m）	20*4.5	24*4.5	28*4.5	32*4.5	36*4.5	40*4.5

Parameter Model	DHS44M	DHS48M	DHS52M	DHS56M	DHS60M
Work width（m）	3	3	3	3	3
Layer	2	2	2	2	2
Veneer thickness（mm）	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5
Heating area （m）	40	44	44	48	52
Cooling area (m)	4	4	4+4	4+4	4+4
Initial water content(%)	50-80	50-80	50-80	50-80	50-80
Finished water content(%)	10	10	10	10	10
Drying capacity (m³/h)	2.7-3.1	3-3.3	3.2-3.5	3.5-3.8	3.8-4.1
Heat exhaustion（10000 kcal）	94.5-108.5	105-115.5	112-122.5	122-132	132-143
Traction motor power(kw)	5.5*2	7.5*2	7.5*2	7.5*2	7.5*2
Hot air fan power (kw)	11*10	11*11	11*11	11*12	11*13
Air cooling fan power（kw）	11	11	11*2	11*2	11*2
Total power (kw)	132	147	158	169	180
Overall size LxWxH（m）	44*4.5	48*4.5	52*4.5	56*4.5	60*4.5

Main Features of Shine Machinery Ebony Wood Veneer Dryer

1. The veneer after drying by Shine veneer dryer is smooth and the moisture content is uniform, and the high temperature drum has direct contact with the wet veneer for heat transfer, and the heat efficiency is high, the heat loss is small, and the heat loss is reduced. the selling price for veneer dried by roller veneer dryer is higher than natural drying.

2.The roller veneer drying machine adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect.

3.Shine roller veneer dryer covers a small area, less ancillary equipment, convenient for transportation, quick installation, and can be put into use quickly and conveniently.

4.Standardized production models, can make different sections or decks according to different capacity requirements, which can meet different customers' requirements.

5.Each section with heat exchanger, which can make full use of the heat and achieve the best drying effect.

6.All the fans are with converter motor, which can guarantee the service life of the dryer.