The continuous mesh belt veneer dryer or band dryer or mesh dryer is one of the main pieces of equipment in veneer and plywood production and can be used for continuous face veneer drying operation. A veneer mesh belt dryer is used for drying veneers with rotary cutting and slicer and it is designed specially to dry the very thin face veneer typically at 0.2-1.2mm thickness. Reasonable design and good parts make veneer mesh dryers save energy and transfer heating fast. The mesh veneer dryer machine uses the latest ultra-low noise centrifugal ventilator, which reduces noise, good for workers. The wind speed is faster and the air volume is higher, therefore the drying speed is much quicker. Adopt variable frequency speed control, which can adjust feed speed according to your veneer thickness and moisture content, to get a perfect drying effect. The mesh is anti-rust and can dry very thin-thickness face veneer.
Main Technical Specifications of Mesh Belt Veneer Dryer
Model No. | Shine-20 |
Working Width | 3000mm |
Layers | 1 deck |
Heating Section | 6 sections X 3000mm=18000mm |
Cooling Section | 1 section X 2000mm=2000mm |
Total Power | 31.7KW |
Transmission Motor | 5.5kw X 1 pc=5.5kw frequency control |
Hot Air Fan | 4kw X 6 pcs=24kw |
Cold Air Fan | 2.2kw X 1pc=2.2kw |
Radiator | 6 units L 2000mm X W 300mm X H 900mm |
Transmission Speed | 1-30m/min |
Heating Medium | Steam or Thermal Oil |
Drying Temperature | 150-180℃ |
Thermal Energy Consumption | 60X104 Kcal Steam 1 T |
Drying Thickness | 0.2-1.2mm |
Initial Moisture Content | 60-80% |
Final Moisture Content | about 10% |
Drying Capacity | 0.5-1M3/h |
Overall Dimension | L 23m(infeed 1.5m+drying and cooling 20m+discharge 1.5m) X W 4.36m X H 2.2m |
Container and Weight | 1 X 40' HQ around 23000Kgs |
Customer Case
The Factory
Packaging & Shipping
Copyright By © Shandong Shine Machinery Co.,Ltd