Conduction Oil Heating Roller Veneer Dryer

Category：

Heat Conducting Oil Heating Veneer Dryer
Brand：

SHINE
Browse number：

8946
Release time：

2019-03-26 11:28:42
E-mail:info@sdshinemachinery.com

Detailed Description
Attributes

Conduction Oil Heating Veneer Dryer Introduction

conductiion oil heating veneer dryer is one of the Shine roller veneer dryer . Except for heat conducting oil heating type, we have have biomass burner heating model, electricity , steam ,coal and other heating models to choose. Shine Roller type veneer dryer machine utilizes the latest international technology of pressurized contact veneer drying, which has the advantages of simple operation, safety and practicality, stable operation, easy maintenance, hot-pressing-levelling--drying once completed, etc. The use of hot air circulation has greatly reduced the operating costs of enterprises, improved the quality of sheet materials and increased the production volume. The roller plays a role in ironing the veneer. After using Shine wood core veneer dryer, the veneer is flat and the moisture content is relatively uniform. When the veneer is located between two roller sets, the lateral direction can be freely contracted, the occurrence of cracks is reduced, and the drying quality is good. The heat dissipation process is carried out in a flat state. In the benign physical process of wood shrinkage, the veneers do not warp and deform, the breakage rate is low, and the yield rate is high.

The traditional dryer is easy to drop chain, card chain, veneer deviation, heat exchange device is easy to plug. These will result in low thermal energy utilization and poor product uniformity. Moreover, its transmission device is complex and maintenance is difficult, which virtually increases the production cost.

layout drawing(1)(1).png

Main Technical Parameter for Shine Rollre Core Veneer Dryer

Parameter Model	DHS20M	DHS24M	DHS28M	DHS32M	DHS36M	DHS40M
Work width（m）	3	3	3	3	3	3
Deck	1	1	1	1	1	1
Veneer thickness（mm）	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5
Heating area （m）	16	20	24	28	32	36
Cooling area (m)	4	4	4	4	4	4
Initial water content(%)	50-80	50-80	50-80	50-80	50-80	50-80
Finished water content(%)	10	10	10	10	10	10
Drying capacity (m³/h)	0.5-0.65	0.65-0.8	0.8-1	1-1.2	1.15-1.35	1.3-1.5
Heat exhaustion（10000 kcal）	17.5-23	23-28.5	28-35	35-42	40.25-47.25	45.5-52.5
Traction motor power(kw)	7.5	7.5	5.5	5.5	5.5	5.5
Hot air fan power (kw)	7.5*4	7.5*5	7.5*6	7.5*7	7.5*8	7.5*9
Air cooling fan power（kw）	7.5	7.5	7.5	7.5	7.5	7.5
Total power (kw)	45	52.5	58	65.5	73	80.5
Overall size LxWxH（m）	20*4.5	24*4.5	28*4.5	32*4.5	36*4.5	40*4.5

Main Features of Shine Roller Core Veneer Dryer

1. The veneer after drying by Shine veneer dryer is smooth and the moisture content is uniform, and the high temperature drum has direct contact with the wet veneer for heat transfer, and the heat efficiency is high, the heat loss is small, and the heat loss is reduced. the selling price for veneer dried by roller veneer dryer is higher than natural drying.

2.The roller veneer drying machine adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect.

3.Shine roller veneer dryer covers a small area, less ancillary equipment, convenient for transportation, quick installation, and can be put into use quickly and conveniently.

4.Standardized production models, can make different sections or decks according to different capacity requirements.which can meet different customers' requirements.