Biomass Type Core Veneer Dryer

Biomass Type Core Veneer Dryer Introduction 

Biomass type core veneer dryer is one economic roller veneer dryer, which can use waste wood as fuel directly . Shine type Roller Veneer Dryer normally is 4m one section , the length can be from 20m to 60m or bigger as customers' special requirements.  The veneer dryer can be one deck , two deck or three deck accoridng to customers' requirements. the thickness of the veneer can be from 0.3mm to 5mm . the dryer is composed of the follwoing sections:

1.Drying system: the veneer dryer adopts the most scientific drying principle ,and the hot air in the hot air stove is injected directly into the upper and lower bellows of the machine by centrifugal blower. The hot air blows to the upper and lower sides of the running veneer through the nozzles of the upper and lower bellows, so that the veneer is heated evenly and thus plays the role of drying

2.Control system: adopt endless gearbox to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect.

3.Transmission system: the veneer is fed  into the machine through the feed inlet vertically, and the chain drives the upper and lower rows of rollers, running relatively. The veneer moves forward

 by the self-weight pressure of the upper roll, and during the veneer passes through the two rollers and the upper and lower air nozzles, it achieves the effect of drying andironing. So the veneer dried by the dryer is flat, smooth and without marks.

4.Heating system:Steam heating, heat conduction oil heating, hot stove type heating，waste wood or other biomass materials. Users can choose one. 

Main Technical Parameter for DHS56M Roller Veneer Drying Line

Features and Advantages of Biomass Type Plywood Core Veneer Dryer

1. The veneer after drying by Shine veneer dryer is smooth and the moisture content is uniform, and the high temperature drum has direct contact with the wet veneer for heat transfer, and the heat efficiency is high, the heat loss is small, and the heat loss is reduced. the selling price for veneer dried by roller veneer dryer is higher than natural drying. 

2.The roller veneer drying machine adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect.

3.Shine roller veneer dryer covers a small area, less ancillary equipment, convenient for  transportation, quick installation, and can be put into use quickly and conveniently.

4.Standardized production models, can make different sections or decks according to different capacity requirements.which can meet different customers' requirements.

5.Biomass type roller veneer dryer can use waste wood as feul, which can greatly save feul cost for the users.