Biomass Hardwood Plywood Sheets Drying Equipment

Category：

Biomass Roller Veneer Dryer
Brand：

SHINE
Browse number：

8869
Release time：

2018-07-26 10:20:39
E-mail:info@sdshinemachinery.com

Detailed Description
Attributes

Introduction of Shine Biomass Hardwood Plywood Sheets Drying Equipment

Biomass hardwood plywood sheets drying equipment produced by Shandong Shine Machinery Co., Ltd. is widely used in flatting drying of high-grade plywood,veneer board and architectural core face veneer. the veneer thickness can be from 0.3mm to 5mm .The wood veneer plywood drying line is equipped with environmental protection type hot air stove. Main characteristics are save fuel, twice use of hot air , increase heating speed.the veneer after drying is flat,moisture content is up to national standard. Equipped with integral type high efficiency energy saving hot air stove. No boiler and other auxiliary equipment, no use water,coal, electricity. Rind ,wood chips and wood craps are all can be as fuel. and can quickly achieve the heat required by the dryer.Shine Machinery can design different modles veneer dryer accordign to customer's different fuel requirements.and try best to save the most cost for customers.

layout drawing of veneer dryer.png

Main Technical Parameter for DHS56M Roller Veneer Drying Line and Others

Parameter Model	DHS44M	DHS48M	DHS52M	DHS56M	DHS60M
Work width（m）	3	3	3	3	3
Layer	2	2	2	2	2
Veneer thickness（mm）	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5
Heating area （m）	40	44	44	48	52
Cooling area (m)	4	4	4+4	4+4	4+4
Initial water content(%)	50-80	50-80	50-80	50-80	50-80
Finished water content(%)	10	10	10	10	10
Drying capacity (m³/h)	2.7-3.1	3-3.3	3.2-3.5	3.5-3.8	3.8-4.1
Heat exhaustion（10000 kcal）	94.5-108.5	105-115.5	112-122.5	122-132	132-143
Traction motor power(kw)	5.5*2	7.5*2	7.5*2	*7.52**	7.5*2
Hot air fan power (kw)	11*10	11*11	11*11	*1112**	11*13
Air cooling fan power（kw）	11	11	11*2	*112**	11*2
Total power (kw)	132	147	158	169	180
Overall size LxWxH（m）	44*4.5	48*4.5	52*4.5	*564.5**	60*4.5

Main Characteristic of Energy Save Type Wood Veneer Plywood Drying Line

1. The veneer after drying by Shine wood veneer plywood dryer is smooth and the moisture content is uniform, and the high temperature drum has direct contact with the wet veneer for heat transfer, and the heat efficiency is high, the heat loss is small, and the heat loss is reduced. the selling price for veneer dried by roller veneer dryer is higher than natural drying.

2.The roller wood veneer plywood dryer adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect.

3.Shine roller veneer dryer covers a small area, less ancillary equipment, convenient for transportation, quick installation, and can be put into use quickly and conveniently.

4.Standardized production models, can make different sections or decks according to different capacity requirements.which can meet different customers' requirements.

5. Biomass type wood veneer plywood dryer can use waste wood as fuel directly ,which can reduce the feul cost to the most .