Shine acacia wood veneer dryer includes 20-60m and 1-3 deck,also we can design special models according to customer's special requirements.The acacia wood veneer dryer produced by Shandong Shine Machinery Co., Ltd. is widely used in flatting drying of high-grade plywood, multi layer board and architectural core face veneer. Shine 2 deck roller veneer drying equipment is equipped with environmental protection type hot air stove. its characteristics: save fuel, twice use of hot air , increase heating speed.the veneer after drying is flat,moisture content is up to national standard. Equipped with integral type high efficiency energy saving hot air stove. No boiler and other auxiliary equipment, no use water,coal, electricity. Rind ,wood chips and wood craps are all can be as fuel. and can quickly achieve the heat required by the veneer dryer.
Parameter Model |
DHS20M
| DHS24M | DHS28M | DHS32M | DHS36M | DHS40M |
Work width（m） | 3 | 3 | 3 | 3 | 3 | 3 |
Deck | 2 | 2 | 2 | 2 | 2 | 2 |
Veneer thickness（mm） | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 | 0.5-5 |
Heating area （m）
| 16 | 20 | 24 | 28 | 32 | 36 |
Cooling area (m) | 4 | 4 | 4 | 4 | 4 | 4 |
Initial water content(%) | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 | 50-80 |
Finished water content(%) | 10 | 10 | 10 | 10 | 10 | 10 |
Drying capacity (m³/h) | 0.8-1.1 | 1.1-1.4 | 1.5-1.8 | 1.8-2.2 | 2-2.5 | 2.4-2.7 |
Heat exhaustion（10000 kcal） | 28-38.5 | 38.5-49 | 52.5-63 | 63-77 | 70-87.5 | 84-94.5 |
Traction motor power(kw) | 5.5*2 | 5.5*2 | 5.5*2 | 5.5*2 | 5.5*2 | 5.5*2 |
Hot air fan power (kw) | 11*4 | 11*5 | 11*6 | 11*7 | 11*8 | 11*9 |
Air cooling fan power（kw） | 11 | 11 | 11 | 11 | 11 | 11 |
Total power (kw) | 66 | 77 | 88 | 99 | 110 | 121 |
Overall size LxWxH（m） | 20*4.5 | 24*4.5 | 28*4.5 | 32*4.5 | 36*4.5 | 40*4.5 |
Copyright By © Shandong Shine Machinery Co.,Ltd
ไทย
Indonesia
Melayu
Tiếng Việt
Pусский
Portugues
Français
Deutsch
日本語
한국어
العربية
Italiano
Polski
Nederlands
Türk dili
हिन्दी
Ελληνικά
Svenska
Español
