Home > Products > Veneer Dryer > 48m Roller Type Single Board Dryer

48m Roller Type Single Board Dryer

Category：

Veneer Dryer
Brand：

SHINE
Browse number：

9082
Release time：

2018-05-16 16:09:22
E-mail:info@sdshinemachinery.com

Detailed Description
Attributes

48m Roller Type Single Board Dryer

48m roller type single board dryer is a normal model Shine roller veneer dryer . Shine veneer drying machine can be from 20m to 60 m . 1-3 deck. normally 4m is one section. we also can design special ones for different customers' requirements. The main components of Shine veneer drying equipment is as follows:1.Drying system :the veneer dryer adopts the most scientific drying principle ,and the hot air in the hot air stove is injected directly into the upper and lower bellows of the machine by centrifugal blower. The hot air blows to the upper and lower sides of the running veneer through the nozzles of the upper and lower bellows, so that the veneer is heated evenly and thus plays the role of drying 2.Control system: Adopt endless gearbox to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect. 3.Transmission system :the veneer is fed into the machine through the feed inlet vertically, and the chain drives the upper and lower rows of rollers, running relatively. The veneer moves forward by the self-weight pressure of the upper roll, and during the veneer passes through the two rollers and the upper and lower air nozzles, it achieves the effect of drying and ironing. So the veneer dried by this machine is flat, smooth and without marks. 4.Heating system:Steam heating, heat conduction oil heating, hot stove type heating，waste wood or other biomass materials. Users can choose one.

layout drawing(1).png

Technical Parameters for DHS48M Veneer Dryer and Others

Parameter Model	DHS44M	DHS48M	DHS52M	DHS56M	DHS60M
Work width（m）	3	3	3	3	3
Deck	1	1	1	1	1
Veneer thickness（mm）	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5
Heating area （m）	40	44	44	48	52
Cooling area (m)	4	4	4+4	4+4	4+4
Initial water content(%)	50-80	50-80	50-80	50-80	50-80
Finished water content(%)	10	10	10	10	10
Drying capacity (m³/h)	1.5-1.7	1.65-1.8	1.7-1.9	1.8-2	1.9-2.2
Heat exhaustion（10000 kcal）	52.5-59.5	57.75-63	59.5-66.5	63-70	66.5-77
Traction motor power(kw)	5.5	7.5	7.5	7.5	7.5
Hot air fan power (kw)	7.5*10	7.5*11	7.5*11	7.5*12	7.5*13
Air cooling fan power（kw）	7.5	7.5	7.5*2	7.5*2	7.5*2
Total power (kw)	88	97.5	105	112.5	120
Overall size LxWxH（m）	44*4.5	48*4.5	52*4.5	56*4.5	60*4.5

Main Features of Shine Roller Single Board Dryer

1. The veneer after drying by Shine veneer dryer is smooth and the moisture content is uniform, and the high temperature drum has direct contact with the wet veneer for heat transfer, and the heat efficiency is high, the heat loss is small, and the heat loss is reduced. the selling price for veneer dried by roller veneer dryer is higher than natural drying.

2.The roller veneer drying machine adopts frequency conversion to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect.

3.Shine roller veneer dryer covers a small area, less ancillary equipment, convenient for transportation, quick installation, and can be put into use quickly and conveniently.

4.Standardized production models, can make different sections or decks according to different capacity requirements.which can meet different customers' requirements

More Pictures About Shine Single Board Dryer Machine

wood board dryer.jpg