28m 3 Deck Wood Plywood Veneer Drying Machine

Category：

3 Deck Veneer Dryer Machine
Brand：

SHINE
Browse number：

9552
Release time：

2018-05-22 16:04:16
E-mail:info@sdshinemachinery.com

Detailed Description
Attributes

28m 3 Deck Wood Plywood Veneer Drying Machine Introduction

The production capacity is about 61cbm/day . The wood plywood veneer dryer produced by Shandong Shine Machinery Co., Ltd. is widely used in flatting drying of high-grade plywood, multi layer board and architectural core face veneer.It is equipped with environmental protection type hot air stove. its characteristics: save fuel, twice use of hot air , increase heating speed.the veneer after drying is flat,moisture content is up to national standard. Equipped with integral type high efficiency energy saving hot air stove. No boiler and other auxiliary equipment, no use water,coal, electricity. Rind ,wood chips and wood craps are all can be as fuel. and can quickly achieve the heat required by the dryer.Users can choose the most economic feul for the veneer drying machine. The main components of Shine veneer drying line is as follows:1.Drying system :the veneer dryer adopts the most scientific drying principle ,and the hot air in the hot air stove is injected directly into the upper and lower bellows of the machine by centrifugal blower. The hot air blows to the upper and lower sides of the running veneer through the nozzles of the upper and lower bellows, so that the veneer is heated evenly and thus plays the role of drying 2.Control system: Adopt endless gearbox to adjust feed speed according to your veneer thickness and moisture content to achieve ideal drying effect. 3.Transmission system :the veneer is fed into the machine through the feed inlet vertically, and the chain drives the upper and lower rows of rollers, running relatively. The veneer moves forward by the self-weight pressure of the upper roll, and during the veneer passes through the two rollers and the upper and lower air nozzles, it achieves the effect of drying and ironing. So the veneer dried by this machine is flat, smooth and without marks. 4.Heating system:Steam heating, heat conduction oil heating, hot stove type heating，waste wood or other biomass materials. Users can choose one.

Main Technical Parameter for DHS28M 3 Deck Wood Veneer Dryer and Others

Parameter Model	DHS20M	DHS24M	DHS28M	DHS32M	DHS36M	DHS40M
Work width（m）	3	3	3	3	3	3
Deck	3	3	3	3	3	3
Veneer thickness（mm）	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5	0.5-5
Heating area （m）	16	20	24	28	32	36
Cooling area (m)	4	4	4	4	4	4
Initial water content(%)	50-80	50-80	50-80	50-80	50-80	50-80
Finished water content(%)	10	10	10	10	10	10
Drying capacity (m³/h)	1.3-1.67	1.67-2.05	2.05-2.55	2.55-3.06	2.93-2.45	3.32-3.83
Heat exhaustion（10000 kcal）	44-58	57-72	70-88	88-105	100-118	114-132
Total power (kw)	100	116	128	144	160	177
Overall size LxWxH（m）	20*4.5	24*4.5	*284.5**	32*4.5	36*4.5	40*4.5