Moisture Content of Wood and Wood Dryer Technology

2019-07-24 10:28:40

Wood moisture content is one of the most important parameters of wood drying. When the moisture content of wood is high, it is necessary to choose lower temperature and higher humidity; the key period of wood moisture content is about 30%, and it is necessary to carry on dryness and steepness; when the moisture content of different wood piles is different, it is necessary to carry out balanced treatment. Do not understand the state of wood moisture content, boring can only be based on experience. Because of the variety of wood, and wood properties are very complex, depending on the experience of dry wood is sometimes unreliable. Excellent wood drying equipment should have the basic function of measuring wood moisture content.

With the newest pressure contact single board drying technology of the world, Shine wood drying equipment and wood veneer dryer  has the advantages of simple operation, safe and practical, smooth operation, easy maintenance, hot pressing - leveling - drying one time. The circulation of hot air has greatly reduced the operation cost of the enterprise, raised the quality of the plate and increased the production. The single board after drying is smooth and the moisture content is even. When the veneer is located between the two groups of roller, the transverse can shrink freely, and the crack is reduced. The drying quality is good. The heat dissipation process is in the smooth state. In the benign physical process of wood shrinkage, the single plate is not warped, the breakage rate is low, and the yield is high.